© DreamLine
All Rights Reserved
© DreamLine
All Rights Reserved
17
ENIGMA AIR ENCLOSURE Shower Enclosure manual Ver 1 Rev 4 062019
©2019 DreamLine. All Rights Reserved
TIP:
Use a metal file to remove any burrs
from the cut end of the
Guide Rail (#04)
.
panel end
panel end
door end
Cut the
Guide Rail (#04)
from the
door end only
which is the end opposite from the glass bracket holes.
glass
bracket
holes
Finished opening (W) - 1” = finished cut length
Cut from the door end only
Metal File
Fig 14
Fig 13
U-Channel
outside
inside
threshold
!
inside
13.
Use a Chop Saw with a blade for cutting stainless
steel to cut the
Guide Rail (#04)
to fit the finished
opening.
The
Guide Rail (#04)
is 1“ less than the model size.
and will need to be
cut to 1” less than the finished
opening size
(
W
).
(Fig 13)
Finished opening (W) - 1” = finished cut length
14.
Align the outside edge of the
U-Channel (#01)
to the inside of the mark
on the threshold
from Step #2
. Level the
U-Channel (#01)
vertically (plumb), mark
the position of the
U-Channel (#01)
on the
wall, and mark the four holes for drilling.
(Fig 14)
