© DreamLine
All Rights Reserved
© DreamLine
All Rights Reserved
ENIGMA AIR ENCLOSURE Shower Enclosure manual Ver 1 Rev 4 062019
25
©2019 DreamLine. All Rights Reserved
Painter’s Tape
Fig 28
Fig 29
1
2
3
Right hand door installation shown as example
4
L
L
Use a Metal File
to remove any
burrs from the
cut end
28.
Measure the distance from the edge of the
Guide
Block (#12)
to the wall. This distance will be (
L
).
Cut the
Anti-Splash Threshold (#11)
to the size of: (
L
).
(Fig 28)
29.
Apply silicone to the bottom of the
Anti-Splash Threshold (#11).
Remove the
face plate
from the
Guide Block (#12).
Insert one end of the
Anti-Splash Threshold
(#11)
fully into the
Guide Block (#12)
and
replace the
guide block face plate.
Align the
Anti-Splash Threshold (#11)
parallel with the front edge of the shower
base or threshold.
Cover the other end of the
Anti-Splash
Threshold (#11)
with the
Anti-Splash
Threshold End Cap (#10).
Apply a small
amount of silicone to the cap to prevent
leakage.
Use sevaral strips of painter’s tape to hold the
Anti-Splash Threshold (#11) (#11)
in place
until the silicone cures.
(Fig 29)
