19
ENIGMA-X / SPARKLE manual Ver 6 Rev 4 07/2016
Fig 22
1
2
3
4
5
6
outside
inside
safety set screw
safety set screw
!
Fig 23
1/16”
Upper Guide Rail
Roller Guard
Roller Guard
front view
side view
!
21.
Attach the two
Rollers (#04)
to the
Door Glass (#05)
with the
wheels
facing outside of the shower. Align the
safety set screw
towards the top for easier access (See Fig 22.1, Fig 23 & page 23
for details).
Suspend the door by hanging the
Rollers (#04)
onto the
Upper
guide rail (#03)
and carefully sliding the bottom edge of the
Door
Glass (#05)
into the groove of the
Guide block (#12)
. If necessary,
adjust the disks on both
Rollers (#04)
to ensure that the bottom
edge of the
Door Glass (#05)
does not touch the bottom of the
Guide block (#12) (see details on page 23).
See Fig 22 & 24 for details
NOTE:
Do not attach the handle to the door glass until instructed to
do so. Do not attempt to lift the door glass with the handle as this
may result in damage to the glass and/or serious personal injury.
Note
: The adjustment disks in
the wheels are the same as the
disks in the Glass brackets and
can be rotated to adjust the
door glass to create a seal with
the wall.
See detailed
description on page 23
.
TIP
: Use a 3/16” shim
beneath the door glass when
adjusting the level of the
door so that the glass does
not make contact with the
guide block.
22.
Mount the two
Roller guards (#20)
onto the door to
secure the door to the
Upper guide rail (#03)
leaving a
1/16” gap
between the roller guards and the guide rail
(Fig 23).
See Fig 22 & 23 for details
