©2017 DreamLine. All Rights Reserved
11
ENIGMA Z Enclosure Manual Ver 1 Rev 4 04/2017
1
2
3
4
Fig. 3
Fig. 4
< 48”or < 60”
< 48”or < 60”
inside
inside
inside
3.
Place the Return Panel Glass (#22)
on the pre-installed shower base or
threshold. Position the panel up against
the wall and level it vertically (plumb).
Make sure the Return Panel Glass
(#22) is aligned with the shower base
or threshold and will create an opening
that is within the model dimensions of
the door section: <48”
(
SHEN-6234480) or <60”
(SHEN-6234600)
depending on the
model size. (Fig. 3)
See the “Shower Enclosure Plan” on
page 8 for dimensions.
4.
Outline the position of the Wall Brackets (#19) on the wall and the shower base or threshold.
Carefully set the Return Panel Glass (#22) aside.
Remove the Wall Brackets (#19) from the Return Panel Glass (#22). Place the brackets against the
outlined positions and mark the holes on the wall for drilling. (Fig. 4)