©2017 DreamLine. All Rights Reserved
16
ENIGMA Z Enclosure Manual Ver 1 Rev 4 04/2017
1
3
2
1
2
Fig. 13
Fig. 14
X-3/8"
12
. Once the
Upper Guide Rail (#03)
is leveled, mark the position of the Wall Bracket (#19) and the
Guide Rail Bracket (#08) on the wall. (Fig. 13)
13.
Mark the Guide Block (#12) position and the holes for drilling on the threshold. (Make sure the
Guide Block (#12)
i
s square to the Stationary Glass (#02)). Measure the distance from the Return
Panel Glass (#22) to the far edge of the Guide Block (#12). This distance will be “X”. The
Anti-Splash Guard (#15) will need to be cut to the size of: X (-) 3/8”. Insert the Anti-Splash Guard
(#15) into the Guide Block (#12) and align the Anti-Splash Guard (#15) parallel to the front edge
of the threshold and mark it. (Fig. 14)