©2017 DreamLine. All Rights Reserved
21
ENIGMA Z Enclosure Manual Ver 1 Rev 4 04/2017
1
2
3
5
Roller Installation
Tool
Fig. 25
Door
Door
Panel
Fig. 24
1
2
3
6
7
4
!
!
21.
Use the
Roller Installation Tool
to install the
two
Roller Assemblies (#04) onto the Door Glass (#05).
(Fig 24.1)
Suspend the door by hanging the Roller Assemblies (#04)
onto the Upper Guide Rail (#03) and sliding the bottom
edge of the Door Glass (#05) into the groove of the
Guide Block (#12).
Be careful not to damage the bottom edge
of the door glass during installation.
(Fig. 24 and Fig. 25)
22
.
Press the Anti-Water Strip (#14) on the vertical edges of the Stationary Glass (#02) and the Door
Glass (#05). Also press the Bumper Seal Strip (#13) onto the vertical edge of the Door Glass (#05).
Attach the Handle (#06) to the Door Glass (#05). (Fig. 25)