Product Maintenance
BASES and BACKWALLS: To ensure long lasting life for your acrylic back walls: wipe them off after each
use with a soft cloth. To clean the acrylic back walls use non-abrasive sprays or cream based cleaners.
Avoid the use of aerosol spray cleaners. Never use abrasive cleansers, metal brushes or scrapers that
could scratch or dull the surface.
GLASS: To ensure long lasting life for your glass shower products: wipe them off after each use with a soft
cloth. Rinse and wipe off the glass using either a soft cloth or a squeegee to prevent soap buildup and
water spots (Hard water can etch the surface of the glass over time if left to dry). To prevent scratching
the surface: never use abrasive cleaners or cleaning products that contain scouring agents. Never use
bristle brushes or abrasive sponges that may scratch the surface.
HARDWARE: To ensure a long lasting finish: wipe off the metal parts after each use with a soft cloth. Do
not use abrasive cleaners or cleaning products containing ammonia, bleach or acid. If accidentally used,
rinse the surface as soon as possible to prevent damage to the finish (peeling or corrosion). After cleaning
the polished finishes, rinse thoroughly and wipe dry with soft cloth.
Clean stainless steel surfaces at least once a week. When applying stainless steel cleaner or polish to
stainless steel hardware, work with (not across) the grain. Never use an abrasive sponge or cloth, steel
wool or wired brush as these may permanently scratch the surfaces.
NOTE: To maximize the life of your door, it is important to regularly inspect the glass
and other hardware for misalignment, proper attachment, and/or damage. Contact
DreamLine
®
with any questions or concerns.
©2017 DreamLine. All Rights Reserved
25
ENIGMA Z Enclosure Manual Ver 1 Rev 4 04/2017