Tools
Soft Head
Hammer
(Ø=3/8")
(10 mm)
Drill bit
(Ø=1/8")
(3 mm)
Drill bit
(Ø=5/16")
(8 mm)
Drill bit
Chop saw and Hacksaw
Silicone
Tape
Measure
Pencil
Screwdriver
Phillips
Level
Drill
Power
Painter’s Tape
NOTE: Unpack your unit carefully and inspect it. Lay it out and identify all parts using the detailed
diagram and packing list in this manual as a reference. Before discarding the carton, check for small
hardware bags that may have fallen to the bottom of the box. If any parts are damaged or missing,
please contact DreamLine
®
for replacement. The shipping boxes may contain extra parts not used in
your model configuration.
NOTE: Retain these installation instructions for future reference.
Tip: Measure the finished opening before
proceeding with the installation to be sure
that the correct model size has been ordered.
Tip: Before installation, cover the shower drain to
prevent losing small parts.
Tip: Set screw gun clutch to low setting when
installing screws and bolts to
prevent stripping the heads.
©2017 DreamLine. All Rights Reserved
7
ENIGMA Z Enclosure Manual Ver 1 Rev 4 04/2017
Professional-grade
Glass suction cup