“INFINITY-Z” Rev.2 Ver.4 08/2013
4
Shower Door Installation
1.
Measure the distance between two walls. This
distance is marked as
“W”.
See Fig. 1 for details.
Fig
. 1
2.
Your
Guide rails (03)
has been precut for your
Shower model opening width:
48”
or
60”
for shower width.
If
W-
width of your wall-to-wall opening is
equal to the size of your Shower model, it is
unnecessary to cut the
Guide rails
and you can
continue to Step 3.
If
W-
width of your wall-to-wall opening is less
than the size of your Shower model,
you will
need to cut the
Guide rails
from the end which
is farthest from the
Glass holder (16)
hole.
The length to cut off will be
L:
L=
Subtract
W
from the size of your Shower
model.
See Fig. 2 & Fig. 3 for details.
Fig
. 2
W
L
L
L
FOR EXAMPLE
If your wall opening
W=47”.
Your shower
model is
48”.
L=48”-47”=1”,
You have to cut
1”
off from
the rail.