Dreamline INFINITY-Z, Installation Instruction

“INFINITY-Z” Rev.2 Ver.4     08/2013 

8

9.

Move the finished frame to the designated position on 

the shower base, the bathtub or the threshold 
(depending on your installation); push it against the 

walls. If your top and bottom wall opening 
measurements are different or if the walls are out-of-
plumb, make adjustment by slightly pulling the 

Wall 

profiles 

out of the

 Glass Profiles

. 

Use the level to adjust the frame in the vertical position 
See Fig. 9 for details.  

Fig

. 9 

10.

Using help to hold this assembly in the right position, 
mark the drill holes on the wall through the holes on 
the flange of the 

Wall Profile

. 

Gently set the assembled unit aside; drill the holes 
using 

Ø 5/16”

 drill bit and insert the 

Wall anchors 

(14).  

Apply silicone along the wall profile and around the 
holes on the wall. Also apply silicone caulk under the 

bottom 

Guide rail (03).

 Place the whole shower 

assembly back in the designated position and secure 
it to the walls using the 

Round head screws 

ST4.2×30 (9)

. 

 
See Fig. 10 for details.  

Fig

. 10 

 Ø 5/16”

2 

1 

3 

4

5