© DreamLine
®
All Rights Reserved
© DreamLine
®
All Rights Reserved
LINEA Shower Screens: Two Adjacent Panels Installation
24
LINEA Shower Panel Installation Manual Ver 2 082021
©2021 Dr
eamLine® A
ll R
igh
ts R
eser
ved
.
The installation of these two panels are
not
identical to
the single panel installation and should be installed on
the side where the shower drain is located.
• Centering the panels on the threshold may be
acceptable. For proper alignment, it is required to
install the return panel
first
(for example, as shown
in
Fig. 17a
) in order to align the inline panel. Mark a
lines to the wall and threshold to determine where
to install the panels, as shown in
Fig. 17b
.
NOTE
This model is fully reversible.
The installation is shown
with the return panel to the right in Fig. 17a.
For
installation with the return panel to the left, simply
reverse the orientation of your installation and begin on
the opposite wall.
Install the surface with the ClearMax
TM
label towards the inside of the shower.
Inline Panel U-Channel =
Glass Width (+) 11/16” (17.48mm)
45° miter
45° miter
Return Panel U-Channel =
Glass Width (+) 5/8” (16mm)
Bottom U-Channel (#29)
cut sizes
miter cuts for right-hand return panel installation shown as an example
Return
Panel
Inline
Panel
1
st
2
nd
Fig 17a
right wall return panel installation shown
Fig 17b
right wall return panel installation shown
Install
the return
panel first
17
