© DreamLine
All Rights Reserved
© DreamLine
All Rights Reserved
INLINE PANEL - Style C shower panel manual Ver 1 Rev 1 07/2018
11
©2018 DreamLine. All Rights Reserved
Double check the alignment and spacing of the panel glass with the
door glass before drilling into the threshold for the bottom bracket.
!
inside
Fig 7b
Fig 7a
Ø1/8”or
Ø5/16”
outside
inside
inside
inside
outside
1
2
3
5
washer
screw
decorative cap
inside
4
*NOTE:
◾
For installation into an
Acrylic Threshold
:
drill a
Ø1/8”(3mm)
hole and use the
Pan Head Screw
ST4.2x35 (#16)
OR
◾
For installation into a
Tile Threshold
:
drill a
Ø5/16”(8mm)
hole, install a
Wall Anchor 5/16”
(#13)
and use the
Pan Head Screw ST4.2x35 (#16)
!
7.
Drill a hole for the
Bottom Bracket (#18)
into the threshold at the mark that was made in
step #5
.
** Use an
Ø1/8”
drill bit for installation into an acrylic base OR use a
Ø5/16”
drill bit and an anchor
for installation into a tile threshold. Use the
Pan Head Screw ST4.2x35 (#16)
along with a raised white
washer to attach the
Bottom Bracket (#18)
to the threshold and snap on the
Decorative Screw
Cover (#17). (Fig 7a and Fig 7b)
