© DreamLine
All Rights Reserved
© DreamLine
All Rights Reserved
9
FLEX Shower Enclosure Panel manual Ver 3 Rev 4 072019
©2019 DreamLine. All Rights Reserved
Fig 2
Fig 3a
Fig 3b
2
3
Ø 5/16"
6
1
4
5
2
Ø 5/16"
3
5
6
1
4
3.
Mark the holes on the wall for drilling
through the pre-drilled hole in the
Return
Panel Wall Profile (#11).
Drill the holes into the wall using a
Ø 5/16”
drill bit and insert the
Wall Anchors (#03)
.
Apply silicone to the back surface of the
Return Panel
Wall Profile (#11)
and
place
it back in position on the wall.
Attach the
Return Panel
Wall Profile (#11)
to the wall with the
ST4.2 x 40 Truss head
screws
(#05). (Fig 3a and 3b)
2.
Mark the holes on the wall for
drilling through the pre-drilled holes in
the
Wall Profile (#01).
Drill the holes into the wall using a
Ø 5/16
drill bit and insert the
Wall
Anchors (#03).
Apply silicone to the back surface of
the
Wall Profile (#01 )
and
place it
back in position on the wall.
Attach the
Wall profile (#01)
to the
wall with the
ST4.2 x 40 Truss head
screws
(#05). (Fig 2)