© DreamLine
All Rights Reserved
© DreamLine
All Rights Reserved
14
FLEX Shower Enclosure Panel manual Ver 3 Rev 4 072019
©2019 DreamLine. All Rights Reserved
inside
inside
Fig 10
1
2
3
Ø 1/8”
View from inside
View from inside
4
5
6
Ø 1/8”
RIGHT
-
HAND
RETURN
PANEL
SHOWN
AS
AN
EXAMPLE
Door
Return panel
10.
Perform the final adjustments to the
Door assembly (#02)
and
Return panel glass (#09)
as
necessary. Operate the Door Glass to
make sure that the magnetic strips are aligned
and make full
contact from top to bottom. Drill holes into the aluminum profile of the Door assembly through the
predrilled holes in the
Wall profile (#01)
using an
Ø 1/8”
drill bit. Drill
Ø 1/8”
holes into the aluminum
profile through the predrilled holes in the
Return panel wall profile (#11).
ATTENTION:
Drill only through the first layer of the profiles.
Secure the
Door assembly (#02)
to the
Wall profile (#01)
and the
Return panel assembly (#09)
to the
Return panel wall profile (#11)
using the
ST4.0 x 10 Pan head screw
(#04)
with the raised white
washers. Cover the exposed screws with the
Decorative covers (#06)
.
(Fig 10)