ASSEMBLY
1) Fit wood dowels J into holes in the
ends of side rails 2 and 3.
Fit wood dowels I into the holes in
the end of the centre rail 7.
2) Screw metal cam studs B into
headboard panel 6.
3) Insert metal cam screws A into the
large holes in one end of side rails
2 and 3.
4) Assemble side rails 2 and 3 to
headboard panel 2 and secure by
tightening cam locks, as shown.
1) Assemble side rails 2 and 3 to the
footboard panes 4 and 5. Secure by
tightening the cam locks in the same
way as described in step 1.
STEP 1
STEP 2
4 of 8
IMPORTANT
Always ensure that arrow on cam
is pointing towards screw. To
tighten turn cam lock clockwise until tight
