Fittings Checklist
Additional Tools Required
Care & Maintenance
Page 2 of 9
Qty
Code
Description
A
x24
C
x24
Spring Washers (for M8 bolt
s
)
Qty
Code Description
B
Bolts (M8x30mm) for
fitting side panels (3)
to headboard & footboard (1&2).
Flat Washers (for M8 bolt
s
)
HARDWARE NEEDED FOR BED ASSEMBLY (PACK B)
HARDWARE NEEDED FOR FITTING GAS-LIFT MECHANISMS (PACK A)
x24
HARDWARE FOR FITTING METAL SLAT FRA ME (PACK C)
Cross-head Screwdriver
In
the
unlikely
event
of
missing
or
damaged
parts,
please
contact the customer service team on 0344
292
00
00.
When
calling
this
number,
please
quote
the
part
code
reference numbers shown in this leaflet when
requesting spare or replacement parts.
Please
retain
your
assembly instruction and
tools provided for future use.
Periodically check that all bolts are still tight.
General Hints & Tips
When they are supplied and are
part of the assembly of this bed,
ensure that the barrel nuts are
fitted the correct way so the
hole in the nut is facing towards
the intersecting hole in the panel.
Intersecting
Hole
We
recommend
the
bed is
assembled in
the
room it shall be
located in.
x4
K
Screw
s
(5x50mm)
fitting
'U' shaped
cross
bar
(
8)
to side panels (3)
M
(a)
Gas-Lift Mechanism
s
x1
x1
M
(b)
Spring Washers (for M8 bolts)
B
A
x8
Bolts (M8x30mm) for
fitting gas-lift mechanisms (
M
)
to headboard & footboard (1&2)
x8
C
Flat Washers (for M8 bolts)
x8
Qty
Code
Description
Qty
Code Description
D
Allen Key (for M8 bolt)
x1
A
ssembly requires
two persons.
Approximate time to
assemble this product
1 HOUR
Spring Washers (for M8 bolts)
B
H
x1
Spanner (for M8 nut)
Metal Plates (for M8 bolts)
x6
F
Nuts (for M8 slat frame bolts)
x6
x6
E
C
Flat Washers (for M8 bolts)
x16
Bolts (M8x50mm) for fitting
Metal Slat Frame (5) to
slat frame support bars
x4
J
Bolts (M8x20mm) for fitting
Metal Plates (K) to Metal
Slat Frame (5)
x2
K
Qty
Code
Description
Qty
Code Description
G
Flange Lock-Nuts (M8) for
gas-lift pistons
x2
