background image

11

M A I N   F E A T U R E S

DeltaWave Massage

®

 Mechanism

The M.8 massage mechanism is uniquely crafted and 
controlled to feel consummately lifelike. In addition 
to basic movements—tapping, kneading, rolling, and 
combinations thereof—the 4D engine uses advanced 
massage algorithms to mimic the feel of human 
hands. It precisely manages speed from fast to our 
proprietary UltraSlow movements. Rapid acceleration 
and deceleration of motor speeds creates patterns of 
movement that feel just like a human. Other proprietary 
software design elements add nuance, complexity, and 
range to the movements of the DeltaWave engine. 
These engineered elements are perfectly blended to 
provide an experience that’s maximally therapeutic 
and deeply relaxing.

MaxTrack

®

MaxTrack describes the interplay between our 49” 
ultra-long track and DeltaWave engine. As a result of 
the flexibility of the Maxtrack design, your M.8 chair 
can seamlessly execute massage in the zero gravity 
position and the lay flat posture, and also offer 
exceptional range during back extension movements.

Back AutoScan

An automatic back scan personalizes the massage 
to your body and guides the programmed massage 
sessions to focus on the shiatsu points of your neck, 
back, and seat.

TheraElliptical

 Kneading & Back Calf Kneading

M.8 expertly massages the lower leg by blending 
compression with rotation (grasp and knead) to 
massage the sides of the calves (gastrocnemues and 
soleaus). Additionally, a calf roller massager works the 
rear of the calf along the medial line. This complex set 
of movements offers an accurate facsimile of how a 
massage therapist works on the lower legs.

Automatic Recline

Automatically sets the chair recline when the massage 
commences. Users can also manually adjust recline to 
a comfortable position. The seat back can be reclined 
between 120° and 165° from the floor. The angle of 
the leg rest can be adjusted 90° according to your 
preference. 

Full Body Air Massage Coverage

The chair is equipped with thoughtfully placed air cells. 
Used all at once, the massage provided will relieve your 
feet, calves, hips, outer thighs, glutes, arms, hands, 
neck, and shoulders, melting away muscle soreness 
and fatigue.

Foot Rollers

A carefully choreographed, 2-way foot roller gently 
soothes the soles of the feet. 

Roller Heat

Infrared heating elements located directly on 
the massage rollers provide point-specific heat 
to help loosen and relax muscles, and improve 
blood circulation. 

Total-Body Heat 

Foot, palm, back and seat heat increases relaxation 
and comfort. Pinpoint roller heat on the massage 
engine provide “hot rocks” style warmth to the 
paraspinal muscles. Each heat zone can be 
independently controlled.

Knead and Stretch Head Rest

The M.8 head rest offers rollers and air-driven cervical 
traction. Movements are carefully programmed to melt 
away neck and shoulder stress and strain and to 
provide soothing, gentle neck traction.

 

Summary of Contents for M.8





















































Reviews: