20
A S S E M B L Y
STEP 4
Install the leg rest.
A. Unbox leg rest. Then remove the two cap head
screws located on front of chair base. Flip the
hinged flaps up.
B. Place the leg rest in front of the chair to connect
the one electrical connector and the one airline
from the leg rest to the base of the chair. Ensure
that the electrical connector’s tab faces upward
and is fully snapped in, and that the airline is
pushed on as far as it will go.
20
Assembling the Chair, continued...
C. With the hinged flaps flipped up, carefully lift the
leg rest so the connection points on it align with
the leg rest brackets on the base. Flip the hinged
flaps back down and reinstall the two cap
head screws.
D. Place the leather flap located at the top/back
of the leg rest just below the zipper located at
the front of the seat pad. When properly aligned,
gently press to adhere the velcro. (See Figure
4D below.)
NOTE: Don’t forget to first remove the velcro
protective cover.
E. Zip the leg rest to the seat pad located on the
base of the chair. (See Figure 4D below.)
Figure 4D
Figure 4E
