33
O P E R A T I O N & U S E
NOTE: Fine Tune Shoulder Position lasts approximately 15 seconds before the shoulder position is stored and used
for all massage choreography.
NOTE: Shoulder scan detection does not occur when selecting Manual or Manual Air massages.
Massage Mechanism Intensity Adjustment
Feature available on Programmed (excluding Full Body Air), Focused massages, and Manual massages (excluding
Breathe, Calf Knead and Neck Knead)
The degree of pressure felt from the massage mechanism, can be adjusted between low, medium and high by
pressing the 3D button on the remote or by adjusting intensity the menu settings of the selected massage.
The default setting is medium.
Using the 3D button on the remote...
• Press and release the button once to go from medium to high intensity. Press again to go from high to low intensity.
Press a third time to go from low to medium intensity. Repeat as desired.
Using the menu settings of the selected massage...
• If not already there, press Home/Menu to access the Main Menu. Use the navigation arrows, located in the center of
the remote, to navigate to the active program, then use the right arrow to get to 3D intensity adjustments. Once the
desired intensity level is highlighted, press OK to select.
NOTE: When low intensity is selected the 3D button will glow green, when medium intensity is selected the button will
glow yellow, and when high intensity is selected the button will glow red.
Massage Mechanism Speed Adjustment
Feature available on Manual massages except Breathe and Rolling
Speed, or the pace at which the massaging movements of the massage mechanism occur, can be adjusted between
ultra slow/low, medium and high (within the menu settings of the selected massage. The default setting is medium.
To adjust Speed using the menu settings of the selected massage...
• If not already there, press Home/Menu to access the Main Menu. Use the navigation arrows, located in the center
of the remote, to navigate to the active program, then use the right arrow to scroll to Speed adjustments. Once the
desired speed is highlighted, press OK to select.
NOTE: Additional Speed options are available when Knead & Tap is selected. Combo 1 combines fast kneading and
slow tapping, while Combo 2 combines slow kneading and fast tapping.
