Dreamwave M.8, Owner'S Manual

36

O P E R A T I O N   &   U S E

Foot Roller Use & Adjustment

During Programmed & Focused Massages...

•  Some Programmed and Focused massages activate the Foot Roller function intermittently throughout the massage 
  session. If you wish to cease this movement during the selected session, you can do so by pressing the Foot Roller    
  button located on the center of the remote. If you wish to reactive the movement, press the Foot Roller button again. 
  You will feel a quick foot roller movement to indicate it’s reactivation, but the feature will then only activate as 
  designed intermittently throughout the program.

NOTE: If Foot Rollers are not programmed during the selected massage, you will not be able to activate this feature. 
Should you try, the remote will beep indicating an error.

NOTE: When the button is illuminated the feature is active, when the button is not illuminated the feature is off.  

 As a Manual Massage...

•  Foot Rollers can be activated as a manual massage by pressing the Foot Roller button located in the center of 
  the remote.

•  If Foot Roller movement is desired, but intensity is too strong, place the foot roller buffer pads (included in the 
  accessory box) in the foot pockets of your chair before your feet are placed for a massage.

Chair Angle Adjustment

During Programmed and Focused massages, the chair will automatically recline to the suggested position for the  

massage. If a different reclining angle is desired you can adjust by the following:

• 

Back Position Adjustment:

 To recline the angle of the chair’s back, press and hold the Back Down button until the 

  desired position is reached. To incline the angle of the chair’s back, press and hold the Back Up button until the 
  desired position is reached. Note adjusting the back position also automatically adjusts the leg position.

• 

Leg Position Adjustment

: To recline the angle of the chair’s leg, press and hold the Leg Down button until the 

  desired position is reached. To incline the angle of the chair’s leg, press and hold the Leg Up button until the desired   
  position is reached.

NOTE: If you press a back or leg up/down button for longer than 2 seconds,the remote will beep indicating that the 
chair will automatically recline/incline to its furthest position. If you wish to interrupt the movement, press the back  

or leg up/down button again.

• 

M.8 Preset Positions:

The remote includes a button, Zero Gravity, that allows quick and easy movement into the 

  following preset positions: Zero Gravity, Lay Flat, and Restore/Upright. To move the chair into these positions, press    
  the corresponding button located on the center of the remote. When the button is not illuminated, the first press 

  will go to Zero Gravity, the second press will go to Lay Flat, and the third press will restore the chair to a full and up   
  right position.  
 

NOTE: If the button is illuminated, the chair is in the Zero Gravity Position.