DREAVER DESK BIKE, User Manual

2.  Installing the stabilizers

»

  Place the trainer upside down. 

Mount the front and rear 

stabilizers on the bottom on the 

trainer with two pairs of screws.

3. Installing/replacing the battery

»

 Remove the display by disconnecting it from it’s slot. The 

battery compartment is situated behind the counter. Install 

or replace a 1.5V AAA battery. Re-assemble the display. 

OPERATIONS

»

  Press the red button to turn on the display. You can select the desired function by pressing 

the red button. Refer to the right upper corner of the display for functions.

»

  TIME 

Total time pedalled.

»

  DISTANCE  

Total distance pedalled.

»

  COUNT 

Total movement times during the workout session.

»

  TOTAL COUNT   

Total movement times during different sessions.

This value cannot be reset unless you replace the battery.

»

  CALS 

Total calories burned.

IMPORTANT: 

The calculation of calories burned is an estimation and should not be considered 

medically reliable. We suggest consulting your doctor or dietician to adapt your diet and energy 

consumption depending on your physical condition, and the sporting activities you intend to be 
involved in. We also recommend that you consult your doctor prior to beginning any new exercise.

Notes: 

The functions change automatically after a couple of seconds so that during your session 

you can keep track of the tie, distance, number of exercises and the total estimated calorie 

consumption. If you prefer one particular function, then press the red button till you have found the 

desired function and “SCAN” is off the display.

The display will automatically switch on when you start exercising or when you press the red button.

The display will automatically switch off when the trainer is not in use for more than 4 minutes.

Reset the exercising data by pressing the red button for 3 to 5 seconds.

English

2

3

DREAVER - DESK BIKE

3