REPLACE THE CONTROL BATTERY
»
Remove the battery box from the remote control and take out the original battery.
»
Install the CR2025 button battery on the battery box, please pay attention to the negative
and positive poles of the battery (positive electrode down). Install the battery box with
the battery on the remote control.
»
The remote control with a new battery.
When the water temperature < the set temperature, it will reheat. When the water
temperature > the set temperature, the heating will be stopped , and the water temperature
will be maintained by circulating heating;
WATER TEMPERATURE CONTROL
2.
The remote control temperature setting part:
a.
Low Temp (41C°) Blue light
b.
Mid Temp (43C°) Yellow Light
c.
High Temp (45C°) Red Light
3.
The timing button of the remote control:
a.
Press one time the timer button = 20 minutes
b.
Press two times the timer button = 60 minutes
4.
The bubble function part of the remote control:
a.
Press the button to turn on the bubble function
RANGE OF REMOTE CONTROL
Within 1 meter
When using, the infrared transmitter on the remote control shall aim at
the ambient light, within a distance of one meter and at an angle of 90°
to the red light. There can be no obstruction in between.
English
DREAVER - FOOT SPA MA SSAGER
4
Summary of Contents for MZD-02
Page 2: ...Languages English Dutch 1 6 7 12 DREAVER FOOT SPA MASSAGER...
Page 15: ......
