DREAVER MZD-03, User Manual

CONNECT THE POWER CORD

ADD WATER & POWER UP

SWITCH BUTTON

Insert the power cord into the power cord socket of the folding 

foot bath.

Power Cord Socket

Place  the  machine  flat,  fill  in  a  proper  amount  of  water  (it  is 
recommended to fill in warm water around 35C° to reduce your 

waiting time) turn on the household power supply, turn on the 

power foot bath, it will geluid three times “dididi, and enter the 

standby mode.

1. 

When the machine is power-off, press the power button one time to turn on, and the 

default temperature is set to 41C°;

2. 

When the machine is power-on, press the power button one time to adjust the 

temperature to 43C°, press the power button for the second time to adjust the 

temperature to 45C°; press it for the third time to turn off;

3. 

When the machine is power-on, the current temperature is displayed; when the machine is 

power-off, it is displayed as OF.

4. 

In the power-on mode, te heating system works as follows: when the water temperature 

is > 51C°, it will enter the over-heat protection mode, at this time, it will automatically shut 

down, and the geluid sound will be issued “di di di”.

1. 

The remote control power-on button part:

 a. 

Press the remote power-on button to turn on; press the remote power-on button 

again to turn off;

b. 

When the machine is power-on, the current temperature is displayed; when the 

machine is power-off, it is displayed as OF;

 c. 

In the power-on mode, the heating system works as follows: when the water 

temperature is > 51C°, it will enter the over-heat protection mode, at this time, it will 

automatically shut down, and geluid sound will be issued “di di di”.

2. 

The remote control temperature setting part:

a. 

The default temperature at start-up is 41C°;

English

REMOTE CONTROL

DREAVER - FOOT SPA MA SSAGER

4