62
Annex 4:
Transmitters / Emetteurs / Polung der Anschlüsse / Emettitori d’impulsi / Emisores / Connector aansluiting /
Vericiler / Transmissores
Compact DN25/DN40/DN50
DN50/DN80/DN100/DN150
Binder plug 6 pins (LF, MF, HF)
Binder plug 3 pins (HF)
(Rear view of the plug)
(Rear view of the plug)
Installation of the Cyble sensor
1) Mounting
2) Screwing (Max torque: 0,25Nm)
3) Sealing
Note: For the plugging of the LF, HF and anti-tampering, please report to the name plate of the meter .
LF,
MF
LF,
HF
HF
LF
LF
Unless on the nameplate noted the following electrical parameters shall be considered:
Low Frequency Transmitter (reed contact)
High & Medium Frequen-
cy Transmitter (inductive)
Characteristics
For Non ATEX pro-
ducts
For ATEX products **
intrinsically safe circuits
EN 60079-0/-11
For ATEX products ***
intrinsically safe circuits
EN 60079-0/-11
Power rating
Max . 10 W
Max . 120 mW
Max . 64 mW
Voltage (Break-down)
Max . 180 V dc
Max . 15 V dc
Max . 15 V dc
Current (Switching)
Max . 50 mA
Max . 50 mA
Max . 50 mA
Capacitance and Inductance
C=0F, L=0H
C=0F, L=0H
C= 90ƞF, L = 250
µ
H
Operation temperature range
-30°C to +60°C
-30°C to +60°C
-30°C to +60°C
** Following recommend values Low Frequency Pulse Transmitters do not have any potential sources of ignition and
shall be not marked according to directive 2014/34/EU .
The device is free to be used in ATEX area as it is a simple apparatus as defined in EN 60079-11 §5 .7 .
*** Proximity detectors conform to EN60947-5-6 (NAMUR) standard .
Characteristics
Low Frequency Transmitter (Cyble Module)
Contact power rating
Max . 1 W
Voltage (Break-down)
Max . 14 .3 V dc
Current (Switching)
Max . 50 mA
Operation temperature range
-25°C to +55°C
1
5
4
3
2
6
1
3
2
