OPERATING
SECTION 4
Page 13
DRESSTA
OM515C520C99/1E
INSTRUMENTS AND CONTROLS
18. GROUND DRIVEN STEERING WARNING LIGHT (IF EQUIPPED)
If a machine is equipped with the ground driven system (that enables steering of the machine at
loss of pressure in the steering system) the light will come on when the system is activated.
A buzzer will also come on.
WARNING: If the ground driven steering warning light start blinking, stop the
engine and apply the parking brake. Do not start the engine until the failure has
been corrected.
19. WARNING LIGHTS (IF EQUIPPED)
This clustered indicator contains the following 5 warning lights (located from the bottom of the
indicator up):
a). transmission oil filter warning light: it come on when the filter element is contaminated and must
be replaced,
b). hydraulic oil filter warning light: it comes on when the filter element is contaminated and must be
replaced,
c). air cleaner warning light: it comes on when the cleaner elements are contaminated and must be
washed or replaced.
d). low engine coolant warning light: it comes on when the coolant in the radiator top tank reaches
its minimal level,
e). hydraulic oil temperature warning light: it comes on when the oil temperature is too high.
20. 24V RECEPTACLE
Used for connecting portable lamp with cable (included in the machine accessories).
21. AUDIBLE ALARM (BUZZER)
It is located under the instrument panel. It sounds if any of the following warning lights starts
glowing:
•
engine oil pressure warning light,
•
parking brake warning light,
•
service brake warning light,
•
ground driven steering warning light (if equipped).
22. TRANSMISSION DIRECTION LEVER LOCK SWITCH.
This switch locks the transmission direction lever in its neutral position if shifted into the furthest left
position. To release the lock, shift it to the right.
22A. RSM System Switch
This switch has 2 positions:
ON - the ride stabilizing system is switched on,
OFF - the ride stabilizing system is switched off.
Summary of Contents for 515C
