OPERATING
SECTION 4
Page 15
DRESSTA
OM515C520C99/1E
INSTRUMENTS AND CONTROLS
NOTE:
items 26,27,35 refer to the standard machine
items 34, 36, 37 refer to the upgraded machine
23. TRANSMISSION GEAR RANGE LEVER
This lever is used to select the gear range according to the operating conditions. Refer to
Par. 4.13 for additional information.
24. TRANSMISSION DIRECTION LEVER
This lever is used to select machine direction. Refer to Par. 4.13 for additional information.
WARNING: When parking a machine, lock the transmission direction lever in
neutral (N) by applying the transmission direction lever lock switch.
25. TURN SIGNAL LEVER WITH EMERGENCY LIGHT SWITCH
The turn signal lever with emergency light switch is clamped on the LH side of the steering column.
When pulled back toward the operator’s seat it activates the left turn signal lights. When pushed
away from the operator’s seat it activates the right turn signal lights. The corresponding arrow
indicator light (left of right) on top of the turn signal switch will also flash. Pull the lever to the left to
make both turn signal lights flash at the same time (in CE version the emergency lights and the turn
signal warning lights are located on the instrument panel - see item 6A, 14B).
26. BOOM CONTROL LEVER
The lever controls raising and lowering operations of the boom. Refer to Par. 4.17.1 for additional
information.
27. BUCKET CONTROL LEVER
The lever controls roll back and dumping operation of the bucket. Refer to Par. 4.17.3 for additional
information.
28. AUXILIARY EQUIPMENT LEVER
The lever is located:
a) on the LH side of the bucket control lever in machines of standard configuration,
b) on the RH side of the boom and bucket control lever in machines in CE configuration.
The lever is integrated with a 3-spool control valve equipped as an optional attachment with optional
mounted equipment such a multi-purpose bucket, quickcoupling etc.
It performs the following functions:
a) with a multi-purpose bucket:
•
when shifted forward it opens the bucket,
•
when shifted back it closes the bucket.
b) with a quickcoupling tool carrier:
•
when shifted forward it locks the quickcoupling,
•
when shifted back it unlocks the quickcoupling.
29. ACCELERATOR PEDAL
Depress the pedal to increase engine speed, release the pedal to decrease engine speed. Pedal
returns automatically to the low idle position.
Summary of Contents for 515C
