SECTION 4
OPERATING
Page 48
OM515C520C99/1E
DRESSTA
LOADER TECHNIQUES
WARNING! Do not operate close to dangerous overhangs. Unskillful operation
of the loader may result in occurrence of overhangs that may slide on the
loader. Prevent occurrence of the overhangs or remove them using other
methods e.g. firing, digging from the top, etc.
Sequence of bank loading is shown in Fig. 4.53.
Fig. 4.53. Bank Loading
1. With the clam fully open, the multi-purpose bucket can be used as a bulldozer. Position the
bucket as shown in Fig. 4.54 for digging.
When the ground is hard or frozen and the area must be ripped before it can be worked, rip
a relatively small section and work it to grade before enlarging the cut. This will require ripping
each section only once, not every morning after the ground has refrozen. To prevent breaking or
bending scarifier teeth, never turn the loader while the scarifier teeth are in the ground.
Fig. 4.54. Bulldozing with Multi-purpose Bucket
Summary of Contents for 515C
