SECTION 4
OPERATING
Page 50
OM515C520C99/1E
DRESSTA
LOADER TECHNIQUES
4. When clearing a rocky area, remove the small and loose rocks first, large and solid rocks can
then be loosened and moved with less difficulty.
When loosening large or solid rocks, greater force and penetration can be obtained by digging
under the rock with the bucket (Fig. 4.57). Lifting the rock with the bucket while pushing will increase
traction i reduce wheel spinning.
Never use the clamshell to remove buried or anchored objects.
Fig. 4.57. Large Rock Removal
When finishing a non-solid material, position the bucket as shown in Fig, 4.58 or Fig. 4.59 and
backdrag the loose material. This method is not recommended where abrasive material is
common.
Fig. 4.58. Backdragging and Leveling
Fig. 4.59. Backdragging and Leveling with Multi-Purpose Bucket
Summary of Contents for 515C
