SECTION 5
MAINTENANCE
Page 32
OM515C520C99/1E
DRESSTA
ENGINE
5.11.2. CHANGING THE CRANKCASE OIL AND FILTER
WARNING! Avoid direct contact of hot oil with your skin. Hot oil can cause
personal injury.
Fig. 5.18. Oil Drain Hose (on RH Side of Machine)
Start the engine and warm it up to the temperature of 60 [ºC] (green area of the engine oil
temperature gauge). Stop the engine. Lift up the hood or radiator grill (Fig. 5.48, 5.48A and 5.48B).
Remove the draining plug and drain the oil completely to remove all oil and impurities from the
engine (Fig. 5.18).
Machines in CE configuration are equipped with automatic drain valve and drain hose (included in
the machine accessories). Remove the castellated nut protecting the automatic valve. Install the
drain valve on the open thread. The drain valve will be opened automatically as the hose nut is
threaded in. Fully threaded nut opens the valve completely.
Fig. 5.19. Lubricating Oil Filter (LH Side of Machine)
Summary of Contents for 515C
