background image

 

IMPORTANT! 

  

THIS IS A HIGH PERFORMANCE PRODUCT,  

USE AT YOUR OWN RISK 

 

Do  not  use  this  product  until  you  have  carefully  read  the  following 
agreement.  This  sets  forth  the  terms  and  conditions  for  the  use  of  this 
product.  The  installation  of  this  product  indicates  the  BUYER  has  read 
and  understands  this  agreement  and  accepts  its  terms  and  conditions. 
This agreement takes precedence. 
 
DISCLAIMER OF LIABILITY 
Drew  Technologies  and  its  successors,  distributors,  jobbers,  and 
dealers  (hereafter  SELLER)  shall  in  no  way  be  responsible  for  the 
product’s proper use and serviceability.  
 
THE BUYER HEREBY WAIVES ALL LIABILITY CLAIMS. 
The  BUYER  acknowledges  that  he/she  is  not  relying  on  the  SELLER’s 
skill  or  judgment  to  select  or  furnish  goods  suitable  for  any  particular 
purpose  and  that  there  are  no  liabilities  which  extend  beyond  the 
description  on  the  face  hereof  and  the  BUYER  hereby  waives  all 
remedies or liabilities, expressed or implied, arising by law or otherwise, 
(including without any obligations of the SELLER with respect to fitness, 
merchantability,  and  consequential  damages)  or  whether  or  not 
occasioned  by  the  SELLER’s  negligence.  The  SELLER  disclaims  any 
warranty  and  expressly  disclaims  any  liability  for  personal  injury  or 
damages. The BUYER acknowledges and agrees that the disclaimer of 
any  liability  for  person  injury  is  a  material  term  for  this  agreement  and 
the  BUYER  agrees  to  indemnify  the  SELLER  and  to  hold  the  SELLER 
harmless  from  any  claim  related  to  the  item  of  the  equipment 
purchased.  Under  no  circumstances  will  the  SELLER  be  liable  for 
damages or expenses by reason of use or sale of any such equipment. 
The SELLER assumes no liability regarding the  improper installation or 
misapplication  of  its  products.  It  is  the  installer’s  responsibility  to  check 
for proper installation and if in doubt, contact the manufacturer. 
 
  
 IN  THE  EVENT  THAT  THE  BUYER  DOES  NOT  AGREE  WITH  THIS 
AGREEMENT:  THE  BUYER  MAY  PROMPTLY  RETURN  THIS 
PRODUCT,  IN  A  NEW  AND  UNUSED  CONDITION,  WITH  A  DATED 
PROOF  OF  PURCHASE,  TO  THE  PLACE  OF  PURCHASE  FOR  A 
FULL REFUND. THE INSTALLATION OF THIS PRODUCT INDICATES 
THAT  THE  BUYER  HAS  READ  AND  UNDERSTANDS  THIS 
AGREEMENT AND ACCEPTS ITS TERMS AND CONDITIONS.

 

 

 

Warning:

  Minnesota  and  California 

state  laws  clearly  affirm  that  no  person 
shall  drive  any  motor  vehicle  with  any 

object  or  material  placed,  displayed,  installed, 
affixed, or applied in or upon the windshield or side 
windows  or  anywhere  else            which  obstructs  or 
reduces  the  driver's  clear  view  through  the 
windshield  or  side  windows.  Drew    Technologies 
does  not  take  any  responsibility  for  any  fines, 
penalties,  or  damages  that  may  be  incurred  as  a 
result  of  disregarding  this  notice.  (See  Minnesota 
Statutes  2005,  Section  169.71  and  California 
Vehicle  Code  Section  26708(a)).  Similar  laws  may 
apply  within  your  province  or  state.  Please  verify 
your provincial or state laws prior to installation. 

 

Warning:

 When mounting the DashDAQ 

to  the  windshield,  place  the  device  in  a 
location  where  it  does  not  obstruct  the 
driver’s  view  of  the  road  and  does  not 

interfere with vehicle controls and safety devices or 
the safe operation of your vehicle.

 

Summary of Contents for DashDAQ Series II
































Reviews: