background image

User manual 

ELECTRIC STOVE BUILT - IN | BARI 60 

 

 

 

16 

9. 

MY 

APPLIANCE ISN’T WORKING CORRECTLY 

The  cooking  zones  are  not  functioning  or  will 
not switch on. 

Check  that  the  mains  electrical  supply  to  the 

appliance  is  correct  and  working.  Check  the 
mains fuse. 

A  humming  sound  is  heard  when  a  cooking 
zone is selected.

 

This is normal; the sound will disappear when the 
zone heats up. 

The cooking zones have become discolored

 

This  may  be  caused  by  burnt  on  remnants  of 

food.  This  will  not  affect  the  working  of  the 
appliance.  However  you  should  make  sure 
that  the  cleaning  instructions  are  being 
followed regularly. 

Only two of the zones on my hob are working 

You should recheck that the terminal screws are 

all fully tightened between the links. 

IMPORTANT: If your appliance appears not to be operating correctly, then you should disconnect it from your 
mains supply and then contact the Service Department. 
DO NOT ATTEMPT TO REPAIR THE APPLIANCE YOURSELF. 

Please note that if an engineer is asked to attend whilst the product is under guarantee and finds that the problem is not 
the result of an appliance fault, then you may be liable for the cost of the call out charge. 

The appliance must be accessible for the engineer to perform any necessary repair. If your appliance is installed 
in such a way that an engineer is concerned that damage will be caused to the appliance or your kitchen, then he 
will not complete a repair. 

 

 

DISPOSAL: No 

Remove this item 

as municipality 

Waste.  

 

Collection of 

Waste separately 

For special treatment it 
is necessary.

 

That  stove  is  labeled  in  accordance  with  European  Directive 
2012/19  /  EU  for  Waste  Electrical  and  Electronic  Equipment 
(WEEE).  Ensuring  that  this  appliance  is  disposed  of  correctly, 
you  will  help  prevent  any  possible  damage  to  the  environment 
and  human  health,  which  could  otherwise  be  caused  if  it  were 
eliminated in the 
Wrong Way.  
The  symbol  indicates  that  the  product  cannot  be  treated  as 
normal waste. It should be a collection point for the recycling of 
electrical and electronic products. 
This stove requires special disposal. For more information about 
treatment, recovery and recycling of this product, please contact 
your local council, your household waste disposal service or the 
shop where you bought it. 
For  more  detailed  information  about  treatment,  recovery  and 
recycling  of  this  product,  please  contact  your  local  city  office, 
service household waste disposal service or the shop where you 
purchased the product.  

 

Summary of Contents for BARI 60


















Reviews: