User manual
WINE COOLER WITH COMPRESSOR BUILT-IN | DOLCETTO 33
9
the instruction manual and insert them into the side of the door from the inside to the
outside.
3. Align the holes in the handle with the screws, tighten the screws using the screwdriver
until the base of the handle is at the level of the door and that the handle is tight but not
too tight to damage the assembly.
4. Replace the gasket the door in place.
1.
Gasket
2.
Flat washer
3.
Lock washer
4.
Screw
5.
Handle
6.
Door frame
5. OPERATING YOUR WINE COOLER
It is recommended you install the wine cooler in a place where the ambient temperature is
between 60ºF-90ºF. If the ambient temperature is above or below recommended
temperatures, the performance of the unit may be affected. For example, placing your unit in
