User manual
WINE COOLER WITH COMPRESSOR BUILT-IN | DOLCETTO 33
11
SETTING THE TEMPERATURE
The Unit is between 40°F and 65°F(5°C and 18°C).
When the unit is plugged in for the first time, the unit will power up automatically to the
preset defaults. The preset temperature is 54°F(12°C).
The temperature will increase by 1°C or 1°F if you touch UP once, or the temperature will
decrease by 1°C or 1°F if you touch DOWN once. To view the set temperature at any time,
touch the UP or DOWN marks. The set temperature will temporarily flash in the LED display
for 5 seconds. Then the display shows the current internal temperature.
Note: If the unit is unplugged, power lost, or turned off you must wait 3 to 5 minutes before
restarting the unit. If you attempt to restart before this time delay the unit will not start. When
you use the unit for the first time or restart the unit after having been shut off for a long time,
there could be a few degrees variance between the temperature you select and the one
indicated on the LED readout. This is normal and it is due to the length of the activation time.
Once the unit is running for a few hours everything will normalize.
STORAGE CAPACITY
Bottles may differ in size and dimensions. The actual number of bottles you are able to store
may vary. You can place 33 standard bottles in the wine cooler. Bottle capacities are
approximate maximums when storing traditional Bordeaux 750 ml bottles.
SHELVES
To prevent damaging the door gasket, make sure to have the door completely opened when
pulling the shelves out of the rail compartment. For easy access to the storage content, you
must pull the shelf conservatively out of the rail compartment; however this unit was designed
with a plastic post on each side of the shelf track to prevent bottles from falling. When
