User manual
WINE COOLER WITH COMPRESSOR BUILT-IN | DOLCETTO 33
12
removing the shelf out of the inner rail, make sure to remove all items first. Then move the
shelf to the position where the notch of the shelf is exactly under the plastic post and lift the
shelf. In order to replace the shelf, repeat these directions in reverse.
Cleaning the Wine Cooler
Turn off the power, unplug the appliance, and remove all items including shelves. Wash the
inside surfaces with a warm water and baking soda solution. The solution should be about 2
tablespoons of baking soda to 1 cup of water.
Wash the shelves with a mild detergent solution. Wring excess water out of the sponge or cloth
when cleaning area of the controls, or any electrical parts.
Wash the outside cabinet with warm water and mild liquid detergent. Rinse well and wipe dry
with a clean soft cloth. Do not use steel wool or steel brush on the stainless steel. These will
contaminate the stainless steel with steel particles and rusting may occur.
Do not use steel wool or steel brush on the stainless steel. These will contaminate the
stainless steel with steel particles and rusting may occur. Do not connect or disconnect the
electric plug when your hands are wet. Never clean appliance parts with flammable fluids.
These fumes can create a fire hazard or explosion. Do not use solvent-based cleaning agents
or abrasives on the interior. These cleaners may damage or discolour the interior.
POWER FAILURE
Most power failures are corrected within a few hours and should not affect the temperature of
your appliance if you minimize the number of times the door is opened. If the power is going to
be off for a longer period of time, you need to take the proper steps to protect your contents.
Moving the Wine Cooler
Remove all items (bottles)
Tape down securely all loose items (shelves) inside your appliance.
Turn the adjustable leg up to the base to avoid damage.