background image

User Manual 

RANGE HOOD | 

PRISMA ISLA 90 

 

 

 

1.  SAFETY NOTIFICATIONS 

Please read these notifications carefully and act upon them, to ensure the user’s personal 
safety and prevent damage to your belongings. 

 

Don’t use this use this item for any other purpose than a household hood. 

(Risk of fire and damage) 

 

Don’t  use  this  item  if  the  power  cord  or  plug  are  damaged,  and  make  sure  the 
socket you use is in good repair. (Risk of electric shock and fire) 

 

Don’t lift the appliance by holding just the power cord; do not yank out the plug by 
pulling on the power cord. 

(Risk of electric shock and fire) 

  Please use an earthed 220V-240V outlet. 

(Risk of damage and electric shock) 

  Make sure not to overload the outlet. 

(Risk of excessive heat and fire) 

  Do not touch the plug with wet hands. Clean the plug if is moist or dusty. 

(Risk of electric shock) 

  Do not let children use the hood 

(Risk of personal injury) 

  Do not close the hood too much when cooking. 

(Risk of damage) 

 

Don’t take down the filters when cooking. 

(Risk of damage) 

  Please wear the gloves when installing the hood. 

(Risk of personal injury) 

2.0 Only have the manufacturers personnel dismantle service or modify the hood. 

 

 

 

 

Summary of Contents for Prisma Isla 90












Reviews: