background image

User Manual 

RANGE HOOD | PRISMA 

TOUCH 90 

 

 

 

time, touch to add a minute, touch to reduce a minute, setting the range from 1 to 

60 minutes, after flashing for 5 seconds, enter the countdown status closed, and the 

indicator changes from flashing to on. After the countdown, the buzzer will activate 

for 3 seconds and then close all functions 

4.  Light button: press the light button, the buzzer will sound, the light will turn on. Press 

again, the light will go out 

 

3.  CLEANING AND MAINTENANCE 

1. REGULAR CLEANING 

•  Never use metal sponges, abrasives or brushes that are too hard. For body cleaning 

and light cover, use a commercial cleaning product that is diluted in water, then rinse 
in clean water and dry with gentle cleansing

.

 

2. MONTHLY CLEANING: 

  FILTER CARTRIDGE 

•  Clean the filter every month to prevent fire hazard. The filter collects grease and dirt 

as it is an element that plays an important role in the efficiency of the extractor. It 
can  be  flammable  if  saturated  with  grease  residues.  Clean  with  commercially-
available  home  product,  rinse  properly  and  dry.  Cleaning  can  be  done  in  your 
dishwasher by placing the filter in up position (do not allow it to come into contact 
with dirty dishes or pots). 

Before using the filter cartridge for the first time, remove the protective plastic. 

-

TO REMOVE THE FILTER CARTRIDGE.

 

 

 

 

 

 

1. Push back with one hand. 
2. Press the filter down and pull out. 
After cleaning, replace the filter and proceed in the same way to reinsert the cartridge. 
 

Summary of Contents for PRISMA ISLA TOUCH 90











Reviews: