User Manual
RANGE HOOD | PRISMA
TOUCH 90
6
3. ANNUAL CLEANING:
• Activation of the carbon filter.
Only installed extractors are applied as a re-circulation unit (not ventilated outside). This
filter catches the odors and must be changed at least once a year depending on the use
given. Buy these filters from your dealer (with the reference number that appears on the
nameplate inside the extractor) and take control when you change them.
DANGER:
Disconnect the extractor before servicing:
Remove the filter.
• Place the new carbon filter into the blower of the extractor inside the surface, and
then put it directly.
• Repeat the same operation for each of the filters.
• Arrange the filter again.
4. CHANGING THE BULBS
Disconnect or shut off the extractor before beginning maintenance.
MODEL USING BULB LIGHTS OR NEON TUBE
Unscrew the screw securing the light cover.
Tilt back.
The type of bulb you use is 2W LED, replace the light
bulb and screw the new one (see diagram)
Summary of Contents for PRISMA ISLA TOUCH 90
Page 1: ......
