User Manual
BUILT-IN GAS STOVE |
TOSCANA 76
4
When this stop is installed in marine vehicles or
caravans, it should not be used as a heater.
Gas piping and electrical cables must be installed in
such a way that they do not touch any part or stop.
Caution
This artifact must be installed by a qualified technician or installer.
• The setting conditions for this artifact are indicated on the label or data plate.
• Remove all packaging before using the stop.
• After unpacking the stopper, make sure that it is not damaged and that the connecting cable
is in perfect condition. Otherwise, contact the dealer before installing the stop.
• The adjacent furniture and all materials used in the installation must be able to withstand a
minimum temperature of tan · c above the ambient temperature of the room where it is in use.
• In the event that the burner flames are accidentally turned off, turn off the burner control and
do not attempt to restart the burner for at least one minute.
• The use of a gas cap results in the production of heat and humidity in the room in which it is
installed. Make sure the stove is well ventilated: keep the natural ventilation holes open or
install a mechanical ventilation device (mechanical extractor hood).
• Prolonged intensive use of the stop may require additional ventilation, example window
opening, or more efficient ventilation, example by increasing the level of mechanical
ventilation.
