background image

Page 5

For technical questions, please call 1-800-444-3353.

SKU 66965 
        

to heart pacemaker could cause 
pacemaker interference or pacemaker 
failure.  In addition, people with 
pacemakers should: 

• Avoid operating alone.

 

• Do not use with power switch locked 

on. 

• Properly maintain and inspect to avoid 

electrical shock.

WARNING: Some dust created by 

10. 

power drilling, and other construction 
activities, contains chemicals known [to 
the State of California] to cause cancer, 
birth defects or other reproductive harm.  
Some examples of these chemicals are: 

• Lead from lead-based paints

 

• Crystalline silica from bricks and 

cement or other masonry products 

• Arsenic and chromium from chemically 

treated lumber 
Your risk from these exposures varies, 
depending on how often you do this type 
of work.  To reduce your exposure to 
these chemicals: work in a well ventilated 
area, and work with approved safety 
equipment, such as those dust masks 

that are specially designed to filter out 

microscopic particles.  (California Health 
& Safety Code § 25249.5, 

et seq.

)

The warnings, precautions, and 

11. 

instructions discussed in this instruction 
manual cannot cover all possible 
conditions and situations that may occur.  
It must be understood by the operator 
that common sense and caution are 
factors which cannot be built into this 
product, but must be supplied by the 
operator.

Vibration Safety

This tool vibrates during use.  Repeated 
or long-term exposure to vibration may 
cause temporary or permanent physical 
injury, particularly to the hands, arms 

and shoulders.  To reduce the risk of 
vibration-related injury:

Anyone using vibrating tools regularly 

1. 

or for an extended period should first 

be examined by a doctor and then have 
regular medical check-ups to ensure 
medical problems are not being caused 
or worsened from use.  Pregnant 
women or people who have impaired 
blood circulation to the hand, past hand 
injuries, nervous system disorders, 
diabetes, or Raynaud’s Disease 
should not use this tool.  If you feel any 
symptoms related to vibration (such as 
tingling, numbness, and white or blue 

fingers), seek medical advice as soon as 

possible.

Do not smoke during use.  Nicotine 

2. 

reduces the blood supply to the hands 

and fingers, increasing the risk of 

vibration-related injury.

Wear suitable gloves to reduce the 

3. 

vibration effects on the user.

Use tools with the lowest vibration when 

4. 

there is a choice.

Include vibration-free periods each day 

5. 

of work.

Grip tool as lightly as possible (while 

6. 

using both hands and keeping safe 

control of it).  Let the tool do the work.

To reduce vibration, maintain the tool 

7. 

as explained in this manual.  If any 
abnormal vibration occurs, stop use 
immediately.

  SaVE thESE 

InStRuCtIOnS.

Summary of Contents for 66965















Reviews: