Drill Master 69487, Owner'S Manual

Page 10

For technical questions, please call 1-800-444-3353.

Item 69487 

SAFET

y

Op
ERA
TION

M

AINTENAN

c

E

SETU
p

Maintenance and Servicing

  procedures not specifically explained in this manual must 

be performed only by a qualified technician.

TO pREVENT SERIOUS INJURy FROM AccIDENTAL OpERATION: 

Make sure that the power Switch is in the off-position and unplug the tool from 

its electrical outlet before performing any procedure in this section.

TO pREVENT SERIOUS INJURy FROM TOOL FAILURE: 

Do not use damaged equipment.  If abnormal noise or vibration occurs, 

have the problem corrected before further use.

cleaning, Maintenance, and Lubrication

1. 

BEFORE EAcH USE,

 inspect the general 

condition of the tool.  Check for:
•  loose hardware, 
•  misalignment or binding of moving parts, 
•  damaged cord/electrical wiring,
•  cracked or broken parts, and 
•  any other condition that may 

affect its safe operation.

2. 

AFTER USE,

 wipe external surfaces 

of the tool with clean cloth.

3.  Remove the Waxing/Polishing Bonnets from the 

Pad when the Waxer/Polisher is not in use.  This will 

allow the Pad to dry and retain its original shape.

4.  To prolong Pad life and shape, store 

the Polisher with the Pad face up.

5.  The Waxing/Polishing Bonnets may be 

machine washed in cold water with detergent.  

Then machine dry at medium heat.

6. 

WARNING!  If the supply cord of this 

power tool is damaged, it must be replaced 

only by a qualified service technician.