Page 10
For technical questions, please call 1-800-444-3353.
Item 69652
maintenance and Servicing
procedures not specifically explained in this manual must
be performed only by a qualified technician.
tO pREVEnt SERiOuS injuRY FROm aCCiDEntal OpERatiOn:
turn the power Switch of the tool off and remove its Battery pack before
performing any inspection, maintenance, or cleaning procedures.
tO pREVEnt SERiOuS injuRY FROm tOOl FailuRE: Do not use damaged equipment.
if abnormal noise or vibration occurs, have the problem corrected before further use.
Cleaning, maintenance, and lubrication
1.
BEFORE EaCh uSE,
inspect the general
condition of the tool. Check for:
• leaking, swollen, or cracked battery pack,
• loose hardware,
• misalignment or binding of moving parts,
• cracked or broken parts, and
• any other condition that may
affect its safe operation.
2.
aFtER uSE,
wipe external surfaces
of the tool with clean cloth.
3.
ni-Cd BattERY muSt BE RECYClED
OR DiSpOSED OF pROpERlY. Do not
short, incinerate or open Battery pack.
4. Disconnect battery pack and store battery pack,
charger, and tool in dry, indoor area out of
reach of children and away from metal objects
(i.e., paperclips, coins) to prevent shorting.
Sa
FE
tY
Op
ER
ati
O
n
m
aint
Enan
CE
SE
tup
