SKU 94371
For technical questions, please call 1-800-444-3353
Page 3
7.
Use eye and ear protection. Always wear ANSI approved impact safety
goggles and ear plugs when using the Impact Driver.
8.
Do not overreach. Keep proper footing and balance at all times. Do not
reach over or across running machines.
9.
Maintain tools with care. Keep tools sharp and clean for better and safer
performance. Follow instructions for lubricating and changing accessories.
The handles must be kept clean, dry, and free from oil and grease at all
times.
10. Remove adjusting keys and wrenches. Check that keys and adjusting
wrenches are removed from the tool or machine work surface before use.
11. Avoid unintentional starting. Be sure the switch is in the Off position when
not in use. Do not carry any tool with your finger on the trigger.
12. Stay alert. Watch what you are doing, use common sense. Do not operate
any tool when you are tired.
13. Check for damaged parts. Before using any tool, any part that appears
damaged should be carefully checked to determine that it will operate
properly and perform its intended function. Check for alignment and binding
of moving parts; any broken parts or mounting fixtures; and any other
condition that may affect proper operation. Any part that is damaged should
be properly repaired or replaced by a qualified technician. Do not use the tool
if any switch does not turn On and Off properly.
14. Replacement parts and accessories. When servicing, use only identical
replacement parts. Use of any other parts will void the warranty. Only use
accessories intended for use with this tool. Approved accessories are
available from Harbor Freight Tools.
15. Do not operate tool if under the influence of alcohol or drugs. Read
warning labels if taking prescription medicine to determine if your judgment or
reflexes are impaired while taking drugs. If there is any doubt, do not operate
the tool.
16. Maintenance. For your safety, service and maintenance should be
performed regularly by a qualified technician.
17. WARNING! People with pacemakers should consult their physician(s) before
using this product. Electromagnetic fields in close proximity to a heart
pacemaker could cause interference to, or failure of, the pacemaker.
18. Use tools with both hands when required. Many tools such as chain
saws, drills, routers, etc., require the use of both hands when operating. This
helps maintain tool stability and keeps hands away from the working area of
the tool.
Note: Performance of this tool may vary depending on variations in tool battery power.
