Instructions for use DS 130
9
Drive Medical GmbH & Co. KG | As per: 22.06.2020 | Errors and alterations excepted
EN
Height adjustment of the feet
Before using the product, ad-
just it to the desired height
(pic. 1). To adjust the height of
the legs:
Press button (1) and at the
same time, pull the leg out
or push it in until the button
clicks into place in the de-
sired position (2). Ensure that
the pushbutton has correctly
clicked into place.
Ensure that all four legs are adjusted to the same height.
Cleaning | Maintenance
• Clean regularly with a moist cloth!
• Do not use any aggressive cleaning agents!
• Do not use abrasive cleaners!
• Do not use any high-dose chlorine and vinegar-based
cleaners!
• To disinfect, a spray disinfectant can be used such as
Descosept AF or Bacillol AF.
• Check the screws regularly and tighten, if necessary.
• In the event of defects, contact your specialist dealer
from whom you purchased this product.
1
Technical data
Product
DS 130
Article number
550200200
HMV-No
04.40.03.1021
Total width, lowest position / Highest position
53 cm / 54 cm
Overall height lowest position / Highest position
62 cm / 72 cm
Overall depth lowest position / Highest position
55 cm / 57 cm
Seat width
41 cm
Seat depth
41 cm
Seat height
42 - 52 cm
Total weight
2,8 kg
Load max.
130 kg
Material frame
Aluminium
Material Seat section
PE-HD
