Instructions for use DURO KD
9
Drive Medical GmbH & Co. KG | As per: 10.06.2020 | Errors and alterations excepted
EN
Assembly
The shower chair is preassembled; only the back rest
needs to be clicked into place and the 4 adjustable feet
need to be assembled (pic. 1-2).
1
2
Height adjustment of the feet
Before using the product, ad-
just it to the desired height
(pic. 3). To adjust the height of
the legs:
Press button (1) and at the
same time, pull the leg out
or push it in until the button
clicks into place in the de-
sired position (2). Ensure that
the pushbutton has correctly
clicked into place.
Ensure that all four legs are adjusted to the same height.
3
Cleaning | Maintenance
• Clean regularly with a moist cloth!
• Do not use any aggressive cleaning agents!
• Do not use abrasive cleaners!
• Do not use any high-dose chlorine and vinegar-based cleaners!
• To disinfect, a spray disinfectant can be used such as Descosept AF or Bacillol AF.
• Check the screws regularly and tighten, if necessary.
• In the event of defects, contact your specialist dealer from whom you purchased this product.
Technical data
Product
DORU KD without backrest
DORU KD with backrest
Article number
550500900
550500950
Overall width
53 cm
53 cm
Overall height
44 - 54 cm
71 - 81 cm
Overall depth
48 - 52 cm
52 - 56 cm
Seat width
50 cm
50 cm
Seat depth
30 cm
30 cm
Seat height
42 - 52 cm
42 - 52 cm
Total weight
2 kg
2,9 kg
Load max.
130 kg
130 kg
Frame material
Aluminium pipe
Aluminium pipe
Material seat section
and backrest
PP (polypropylene) /
PU (polyurethane)
PP (polypropylene) /
PU (polyurethane)
