Instructions for use DH 135
9
Drive Medical GmbH & Co. KG | As per: 04.06.2020 | Errors and alterations excepted
EN
Assembly
The shower chair is preassembled; only the back rest
needs to be clicked into place and the 4 adjustable feet
need to be assembled (pic. 1-2).
1
2
Height adjustment of the feet
Before using the product, ad-
just it to the desired height
(pic. 3). To adjust the height of
the legs:
Press button (1) and at the
same time, pull the leg out
or push it in until the button
clicks into place in the de-
sired position (2). Ensure that
the pushbutton has correctly
clicked into place.
Ensure that all four legs are adjusted to the same height.
Cleaning | Maintenance
• Clean regularly with a moist cloth!
• Do not use any aggressive cleaning agents!
• Do not use abrasive cleaners!
• Do not use any high-dose chlorine and vinegar-based cleaners!
• To disinfect, a spray disinfectant can be used such as Descosept AF or Bacillol AF.
• Check the screws regularly and tighten, if necessary.
• In the event of defects, contact your specialist dealer from whom you purchased this product.
Technical data
Product
DH 135 without backrest
DH 135 with backrest
Article number
550800100
550800200
Overall width
42,5 cm
42,5 cm
Overall height
43 - 53 cm
72 - 82 cm
Overall depth
47 cm
61 cm
Seat width
41 cm
41 cm
Seat depth
37 cm
37 cm
Seat height
43 - 53 cm
43 - 53 cm
Total weight
2 kg
3 kg
Load max.
135 kg
135 kg
Frame material
Welded steel tubing, powder-coated
Welded steel tubing, powder-coated
Material Seat section
and Backrest
High-density polyethylene
High-density polyethylene
