User Manual Multitec
17
Drive Medical GmbH & Co. KG | As per: 13.03.2018 | Subject to error and change
EN
Seat depth
Take the leg supports
off and remove the seat
cushion.
Loosen the fastening
screws (1) beneath the
seat surface.
Pull the entire front section
out until it stops.
Retighten the fastening screws securely.
Reposition the seat cushion on the seat surface.
Length of lower leg
The adjustment is correct
if, when your feet are
placed on the foot plate,
your thighs are placed
horizontally.
Loosening the hexagon
socket screw enables you
to simply change the lower
leg length. Retighten the
hexagon socket screw
after the adjustment.
Calf pads
The calf pads can be adjusted both in height and depth.
Height (Fig. 17):
To adjust the height of
the calf pads as desired,
first loosen the hexagon
socket screw.
You can now change the
position of the calf pads
upwards or downwards.
The refasten the hexagon
socket screw.
Depth (Fig. 18):
The depth of the calf pads
can be adjusted with a few
maneuvers.
Loosen the hexagon socket
screw and bring the calf pad
into the desired position.
Then retighten the hexagon
socket screw.
Let go of the locking knob and pull the headrest up
until it snaps into the first position. Now, by pulling the
locking pin outwards again and simultaneously pulling
upwards, you can change the height of the headrest.
Make sure that the locking knob snaps into the selected
position. (Fig. 11).
Push handle
The push handle can easily be adjusted to the
requirements of the attendant.
Loosen the T-screws on both sides of the push handle
(Fig. 12 - 13) and bring the push handle into the desired
position.
Take care that the T-screws are securely tightened again.
Height of the armrest
The height of the armrests can be adjusted for
comfortable and fatigue-free sitting.
To change the height of the armrests, press the locking
knob and pull the armrest upwards. (Fig. 14).
The armrest can be locked in 3 positions.
In addition, the armrest holder can be secured at
3 heights. (A)
A
