26
11. MAINTENANCE & SERVICING
11.1 General Guidelines
Routine maintenance is required to ensure the maximum use of your powerchair.
While some of the maintenance can be done by yourself, you may need assistance
from an authorised service engineer. If you have any doubts, contact Drive DeVilbiss
Healthcare Ltd.
• Always disconnect the powerchair from the main power supply
and remove the battery prior to performing any maintenance
procedures (where viable).
• Never attempt to deconstruct the enclosures, re-wire any
components or replace internal battery components. Modification
of the powerchair is not allowed without the permission of the
manufacturer and electrical system components are only to be
replaced by authorised service personnel.
• No maintenance or servicing should be conducted while the
device is in use – risk of electric shock, entrapment, loose
parts, etc. If not possible due to the occupant’s mobility, a risk
assessment should be carried out, and if deemed safe to proceed,
care should be taken to avoid contact with the occupant when
working on electrical items.
• Failure to carry out the following checks at the stated frequencies
could negatively influence the essential performance of the
powerchair and as a result put individuals at risk.
• Allow all components to cool before performing maintenance.
Parts of the motor system can generate heat while driving.
Warning
All maintenance should be conducted by a competent person.
Disassembling the controller, motor, or charger by anyone other than
an approved service engineer is prohibited and voids any applicable
warranty. For any maintenance concerns, contact Drive DeVilbiss
Healthcare Ltd.
Caution
Summary of Contents for ACFPC17BLK
