CMS Electric Scooter
Page 12 of 16
Owner’s Handbook (Code: CMS_IFU 05/18)
7.8
Assembling the Scooter
Use the procedure below to assemble the scooter:
1.
Raise the tiller on the front section. Turn the
tiller adjustment knob (1) towards the rear of
the scooter and then lift up the tiller (2) to the
required position. Secure the tiller by turning
the knob towards the front of the scooter.
2.
Connect the front and rear sections together.
Hold the back of the rear section and lift the
front section in to place using the lever. Then
release the rear section, and lower the front
section with the lever. Release the lever and
ensure the sections are securely linked.
3.
Drop the battery pack in to the void in the
scooter. Press lightly on the top of the battery
pack to ensure the battery pack is fully
installed.
4.
Insert the seat in to the seat post. Push the seat
lever forward, and swivel the seat until it locks
in position.
5.
Place the basket on to the front of the tiller.
