CMS Electric Scooter
Page 5 of 16
Owner’s Handbook (Code: CMS_IFU 05/18)
chrome post in to the chassis of the scooter.
Reposition the seat post to the required
height and then secure by reattaching the
nut and bolt.
Adjusting the Armrest Width
Firstly, insert the armrest tubing in to the seat.
Then add the lock pin in to the armrest tubing at
the required width.
Secondly, secure the armrest using the threaded
knob to prevent it from rattling. Repeat for the
other arm.
Tiller Lock. When the tiller is centred, pull the
tiller lock out and twist to secure the tiller for
transportation. Push the tiller lock up to release.
Always ensure the tiller lock is
disengaged when driving the scooter.
Always check the tiller moves and turns
freely before driving.
Battery Gauge.
The LEDs will illuminate to show the amount of
power remaining in the batteries. The more LEDs
are lit, the more power is remaining. When only the
three leftmost LEDs are lit, then the batteries should
be recharged.
The remaining power indicated by the battery gauge
will vary by the driving time incurred and how you
drive. Repeated starting, stopping and climbing will
