HW007 Scooter Owner’s Handbook (HW007_IFU 08/15)
Page 6
ADJUSTMENT
Tiller Positioning:
Loosen the quick release lever, fold the tiller up to vertical position and tighten the quick release lever. If you want
to adjust the tiller angle, you have to lift the tiller upper to make sure the stopper goes into the groove by releasing
the quick release lever.
To adjust the width of the Arm-rest:
Loosen the tension fixing nuts and adjust the width to your seating comfort.
Assembling the rear part:
Tilt the rear part of scooter backwards at approximately 45º.
Lift the front body and catch the lower frame tube with the frame hooks properly at the proper position
before combining the rear part and front part.
Assemble the rear part and front part carefully in order not to scratch the cover.
Easy-to-dismantle
Adjust the tiller
Quick release lever
Frame hook
Lower frame tube
Lift up the front body
HW007 Scooter Owner’s Handbook (HW007_IFU 08/15)
Page 5
SPECIFICATION
Model
HW007
Weight Capacity (MUW)
120kg (19 stone)
Drive Wheel
24 x 7.5cm (9.5” x 3”)
Front Wheel
24 x 7.5cm (9.5” x 3”)
Maximum Speed
4mph (6.4kph)
Battery
12V 22Ah x 2pc
Maximum Range
13 mile (20km)
Charger Type
2A Offboard 120/240V
Controller
PG Drives S-Drive
Motor Type
400W 4400RPM 22:1
Turning Radius
198cm (78”)
Suspension
Rear
Maximum Gradient
10º
Length
107cm (42”)
Width
58cm (23”)
Height
92cm (36”)
Seat Width
40cm (16”)
Seat Height
40cm (16”)
Seat Depth
41cm (16”)
Back Height
35cm (14”)
Wheel Base
82cm (32”)
Ground Clearance
7cm (3”)
Footwell
30cm (12”)
Note:
Maximum Range and Speed are based on optimal
conditions. User weight, battery condition, temperature,
terrain, gradient, weather conditions and driving style may
all reduce the maximum range and speed.
Drive Medical Ltd reserves the right to change
specifications without prior notice. Specifications of the
product purchased may differ from those stated.
Summary of Contents for HW007
Page 1: ...HW007 User Manual ...
